圆锥破碎机的工作原理—以Truemax圆锥破碎机为例

关键词：圆锥破碎机组成-圆锥破碎机原理-圆锥破碎机应用

Key words: cone crusher composition，cone crusher principle，cone crusher application

Truemax圆锥破碎机整机的性能较高，双向过铁释放液压缸能够让坚硬的石料通过破碎腔时，保证连续运行，生产颗粒间的破碎作用，针片状石子减少，粒级更加均匀，具有优质的石料颗粒，

Truemax cone crusher, the performance of the whole machine is relatively high, two-way iron release hydraulic cylinder can make hard stone through the crushing chamber, to ensure continuous operation, production of particles between the crushing effect, needle flaky stone reduction, more uniform grain size, with high quality stone particles,

效率高：液压的清腔功能，能够轻松快速清理破碎腔内堆积的物料，可立减大幅度的降低了人工劳动强度，提高了工作效率。

High efficiency: the hydraulic cavity cleaning function can easily and quickly clean up the accumulated materials in the broken cavity, which can reduce the manual labor intensity greatly and improve the working efficiency.

耐磨性也是比较高的，所有的耐磨保护，将维修费用降低，但是用完一定要根据使用手册进一步的保养。

Wear resistance is also relatively high, all wear resistance protection, maintenance costs will be reduced, but after use must be further maintenance according to the user’s manual.

液压圆锥破碎机的结构组成

Structure composition of hydraulic cone crusher

液压圆锥破碎机主要由基座总成、传动轴总成、电机总成、动锥总成、定锥总成组成。其中辅助部分由电气系统、润滑系统、液压系统等。

Hydraulic cone crusher is mainly composed of base assembly, drive shaft assembly, motor assembly, moving cone assembly, fixed cone assembly. The auxiliary part consists of electrical system, lubrication system, hydraulic system and so on.

　　液压圆锥破碎机的应用环境：

　　1、新型的液压圆锥破碎机运行更安全稳定，检修方便、停机时间短，产量有保证，更适合应用于大型砂石生产系统中。

　　2、圆锥破碎机采用多点分体液压润滑控制系统，轴承润滑和过载保护能力更强，使整条生产线的自动化程度大大提高。

　　3、圆锥破碎机对腔型和冲程进行了重新实验设计，更适合破碎河卵石、玄武岩、铁矿石等坚硬物料，产量比普通弹簧圆锥破提高35%-60%。

Application environment of hydraulic cone crusher:

1, the new type of hydraulic cone crusher is more safe and stable operation, convenient maintenance, short downtime, guaranteed output, more suitable for application in large sand production system.

2, the cone crusher adopts multi-point split hydraulic lubrication control system, bearing lubrication and overload protection ability is stronger, so that the automation degree of the whole production line is greatly improved.

3. The cavity type and stroke of cone crusher are redesigned, which is more suitable for crushing hard materials such as river pebbles, basalt and iron ore. The output of cone crusher is 35% to 60% higher than that of ordinary spring.